The filter element of stainless steel sintering net is referred to as stainless steel sintering filter element. The filter element is made of standard five layers of sintering net by superposition and vacuum sintering. The filter element of stainless steel sintering screen is made of stainless steel sintering mesh, which is divided into five parts: protective layer, filter layer, dispersion layer, framework layer and framework layer. The filter material has uniform and stable filtering accuracy, high strength and rigidity, and is an ideal filter material for occasions with high requirements for compressive strength and uniform filtering accuracy.
The main difference between stainless steel sintered mesh filter element and other filter elements is the use of a large number of high-precision welding process. The sintering filter element of stainless steel mesh is made of sintered filter cartridge after cutting and high-precision welding. The most important point of the sintering filter cartridge is the use of a large number of high-precision welding technology. The sintering filter cartridge is welded by welding after rolling. The roundness of the welding joint should be ensured. The welding seam should be corrected after welding to make the whole look more beautiful.
The selection of raw materials, precision control and welding process are three very important factors for the filter element of stainless steel sintering mesh. The products in the market are mixed with fish eyes, inferior materials, low filling and high filtering accuracy, and rough processing technology, which make some products offer very low prices. Customers need to polish their eyes to avoid the loss outweighing the gain and causing the loss of production accidents.
The main difference between stainless steel sintering filter element and other filter elements is the use of a large number of high-precision welding process. The stainless steel sintered metal mesh is welded after rolling. The roundness of welding shall be ensured and the weld shall be leveled after welding, so as to make the whole look beautiful and prepare for the next overall welding.
Then, the sintering mesh is welded on the end covers at both ends by stainless steel welding wire. During the welding process, the sintering mesh cannot be burnt out to prevent local burn out and breakdown, resulting in the filter element failing to play a filtering role. Therefore, argon gas protection must be carried out for the welding environment during the welding process. All of the above welding process must have welding tooling and special welding equipment, and the welding technology requirements of workers are also relatively strict. In case of air leakage in the pressure range after welding bubble test, all filter elements will be scrapped.
Post time: Dec-02-2020